In November 2026, the Aviation Section of the Mechanics Student Research Group of the Warsaw University of Technology celebrates the 110th anniversary of its establishment. Founded in 1916, it was one of the most important communities shaping Polish aviation of the interwar period. Members included designers who built the first successful Polish glider and sports aircraft, and who later went on to create the renowned RWD family of aircraft.
Section’s beginnings in occupied Warsaw (1916–1920)
The Section emerged from the Mechanics Student Research Group of the Warsaw University of Technology, established on 1 February 1916. Despite the difficult conditions of the German occupation, the Society developed successfully and soon had around 100 members. On 4 November 1916, twenty senior students who were members of the Research Group founded the Aviation Section, with Ryszard Bartel and Zygmunt Bruner among the initiators of the venture.
Without its own premises or workshop facilities, the Section initially had to limit its activities to scientific lectures. Opportunities for practical work became available only after the Society for Air Navigation launched its Aviation Courses. In autumn 1918, all members of the Section joined the military to fight for Poland’s independence, and the Section’s activities were suspended.
Revival and the triumph of “Akar” (1921–1924)
Activities resumed in the 1921/22 academic year. Thanks to the support of the military authorities, the Section was granted access to the Central Aviation Workshops in 1923. Through the efforts of Prof. Czesław Witoszyński, academic adviser to the Mechanics Student Research Group, it also gained access to the Aerodynamics Laboratory of the Warsaw University of Technology. It was there that the first three gliders designed independently by members of the Section were developed.
The first of these was the SL-1 “Akar”, designed by Adam Karpiński with the collaboration of Ryszard Bartel. In 1923, the “Akar” took part in the first Polish gliding competition, known as the First Glider Competition, held in Białka near Nowy Targ. The competition was organised by the Polish Aviators’ Association of Poznań in cooperation with the Aviation Section of the Warsaw University of Technology. Flying the “Akar”, the designer’s brother, Tadeusz Karpiński, and Ryszard Bartel secured first and second place respectively.
After several design modifications were introduced, including the enclosure of the cockpit, Tadeusz Karpiński set a Polish endurance record in the “Akar” during the Section’s gliding expedition to Babia Góra in April 1924, remaining airborne for 4 minutes and 5 seconds. The glider was, however, seriously damaged during the landing.
At the beginning of 1925, Jerzy Wędrychowski and Stanisław Prauss designed a new plywood-covered fuselage for the aircraft. Plans were also considered to convert it into a motor glider, the “Akar II”, powered by a 45 hp Anzani engine. However, this work was ultimately not undertaken, and the unrepaired glider was destroyed in autumn 1925.
Adam Karpiński, a graduate of the Warsaw University of Technology in 1926, was not only a designer and aviator, but also a passionate mountaineer and Himalayan climber. He lost his life in 1939 during an expedition to Tirsuli in the Himalayas.
During the 1921-24 period, the Section suffered its first significant loss. On 13 November 1923, Lieutenant Pilot K. Szczepański, a founding member, long-serving collaborator and member of the Section’s management board, was killed.
“Czarny Kot” and the first Polish sports aircraft (1924–1925)
The Section’s second glider was the SL-2 “Czarny Kot”, designed in 1924 by the student Jerzy Drzewiecki. It was likely test-flown at Mokotów Airfield later that same year and was exhibited at the LOPP exhibition in Warsaw in October 1924. Following refurbishment, it took part in the Second Glider Competition at Oksywie near Gdynia in May 1925, where Capt. S. Jakubowski completed nine flights in the aircraft and received a prize for a total flight time of 224 seconds.
Also in 1924, another member of the Section, Jerzy Dąbrowski, designed the first Polish sports aircraft, the D-1 “Cykacz”. The aircraft was built at the Central Aviation Workshops with funding from the Air and Gas Defence League and made its maiden flight at Mokotów Field in 1925. Dąbrowski later designed several aircraft for the State Aviation Works (PZL), including the PZL-37 “Łoś” bomber. After the Second World War, he worked in the aviation industry in the United Kingdom and the United States. As a member of Boeing’s design office he participated in the development of the Gemini spacecraft capsule.
During this period, members of the Section had the opportunity to fly military aircraft as well as aircraft operated by the Aerolloyd airline. In 1924, the Section organised aviation ground crew courses, and in 1925 its members were able to complete training at the Pilot School in Poznań on preferential terms.
Workshop in the New Drawing Hall building (1926–1929)
In 1926, members of the Section built several examples of the JD-2 sport and training aircraft, designed by Jerzy Drzewiecki and powered by a 45 hp Anzani engine. They did so in premises within the New Drawing Hall building that had been made available to them by the university authorities. The first aircraft demonstrated satisfactory performance during a test flight in October 1926, but caught fire after landing and was destroyed. A second aircraft was personally test-flown by the designer in June 1927.
The Section’s next designs were the prototypes of the WR-1 aircraft by Stanisław Wigura and Stanisław Rogalski, and the PS-1 by Stanisław Prauss. At the end of 1927, Rogalski, Wigura and Drzewiecki joined forces to form the design team RWD, created from the initials of their surnames. Their first joint aircraft, the RWD-1, made its maiden flight in 1928 and received an award from the Ministry of Communications for the boldness and originality of its design. It marked the beginning of a series of subsequent RWD aircraft, and in 1929 the Section’s workshop began producing them in small batches.
From a student society to an aircraft factory (1930–1939)
In 1930, the Section’s workshops were relocated to Okęcie Airport, where new facilities funded by the Air and Anti-Gas Defence League were made available. In March 1933, the operation was transformed into a company known as Experimental Aviation Workshops (Doświadczalne Warsztaty Lotnicze). Jerzy Wędrychowski, who had previously been associated with the Section’s workshop, was appointed its director.
Aircraft whose origins lay in the student workshop went on to achieve some of the greatest successes in Polish aviation during the interwar period. Flying the RWD-6, Franciszek Żwirko and Stanisław Wigura won the international Challenge 1932 competition. Just a few weeks later, on 11 September 1932, both men were killed in an air crash while travelling to Prague for another competition. Two years later, Jerzy Bajan and Stanisław Płonczyński secured first and second place in the Challenge 1934 competition flying RWD-9 aircraft. More than 550 RWD-8 training aircraft were produced, including those built under licence by the PWS aircraft works.
During this period, members of the Section continued their own design work, producing a number of original aircraft, including the AMA and MIP Smyk motor gliders, the MT-1 seaplane glider, the WJ-3 glider, and the RS-III aircraft.
Section alumni around the world
The significance of the Section is also reflected in the later careers of its members, whose achievements extended far beyond Poland’s borders. Stanisław Prauss led design teams responsible for aircraft including the PZL.16 and the PZL-23 “Karaś”. After the Second World War, he worked for the British aircraft manufacturer de Havilland on the Comet and Trident programmes. He died in London and was laid to rest in Warsaw.
Between 1941 and 1948, Stanisław Rogalski worked in Turkey, where he established the Department of Aircraft Construction in Istanbul. He subsequently moved to the United States, where he worked for companies including Grumman and taught applied aerodynamics at Princeton University.
Jerzy Drzewiecki, who carried out the maiden flights of the first RWD aircraft, settled in Canada after the war, while Jerzy Wędrychowski joined the American manufacturer Temco in 1949.
War and a new beginning
The outbreak of the Second World War paused the activities of the Section. Its work resumed at the turn of 1945-46. Today, the aviation traditions of the Warsaw University of Technology are carried forward by student scientific societies, most notably the Aviation Student Research Group (Koło Naukowe Lotników), which was established in 1962 on the initiative of the renowned Polish aircraft designer Edward Margański. It is also worth noting that the Society’s distinctive logo was created during this period by Dr Roman Świtkiewicz. The Aviation Student Research Group has played, and continues to play, a significant role in the development of aviation technology. By bringing together future engineers and fostering scientific and technical ambition, it helps ensure that its graduates form the core of Poland’s engineering elite.
In the 1970s, the WUT Glider Programme was launched at the initiative of Dr Świtkiewicz. The programme was based on the active involvement of students from the Faculty of Power and Aeronautical Engineering in the design and construction of new gliders. In 1981, the ultralight PW ULS glider completed its maiden flight.
In the following years, a series of increasingly advanced designs were developed, culminating in the success of the PW-5 glider, which won the international World Class glider competition in 1993. The aircraft subsequently entered serial production, with more than 250 units manufactured. The PW-5 was followed by the PW-6, a two-seat glider that can be regarded as its successor and which also entered serial production.
The final two decades of the twentieth century were also a period during which members of the Aviation Student Research Group (KNL) helped preserve prototype versions of gliders and motor gliders produced in Poland. This was made possible thanks to the commitment of the Society’s faculty advisers at the time, Dr Bohdan Jancelewicz and Dr Witold Błażewicz, as well as numerous employees of the Experimental Glider Works (Szybowcowe Zakłady Doświadczalne) in Bielsko-Biała, many of whom were graduates of the Faculty of Power and Aeronautical Engineering (MEiL). The gliders restored, rebuilt and modernised during that period, including the Jantar, Puchacz and Junior, are still used today by student pilots of the Warsaw University of Technology at the University's aviation centre in Przasnysz.
Today, several student research groups continue the traditions of the Aviation Section. In addition to the Aviation Student Research Group (KNL), these include organisations such as the AeroDesign Interfaculty Student Research Group and the MelAvio Avionics Student Research Group. In 2015, to mark the centenary of the re-establishment of the Warsaw University of Technology, students of the Faculty of Power and Aeronautical Engineering built a replica of the “Akar” glider, which was subsequently displayed in an exhibition in the University’s Main Building. The Aviation Students’ Society (KNL) emblem was placed on the pilot’s seat.
110 years later
The history of the Aviation Section, from the lectures organised by twenty students in occupied Warsaw, through the first gliding competitions in the Podhale region and the workshop in the New Drawing Hall building, to aircraft achieving success in international competitions and designers working across several continents, remains one of the finest chapters in the history of the Warsaw University of Technology. We express our appreciation to all generations of Section members and wish its present-day successors safe and successful flights. We in invoke the motto “Live to fly, fly to live!”